Item NO.:
JLY-Z50Application:
As thickening agent for water based ink,patint&coatingSolid Content:
50%Clour:
Transparent with light yellow liquidSolvent:
Water or environmental hydrophilic solventDescription:
JLY-Z50 is as non-ionic polyether polyurethane thickener, endows the recipe with a false plastic condition. It provide effect thickening property in the low and middle share speed, also can provide higher thixotropic property and thickening property to the system. It is not dependent on the pH value, so it can be used alone, and also can used together with other thickener. suitable for all kinds of exterior coatings, water based paint, water based adhesive, water based ink system, etc. need to dilute with an alcohol ether solvent, and used it after homogeneous mixing，Could combine with other thickening additives to obtain the required rheological properties
Application
Suitable for waterborne coatings and adhesive
Technical Data
|
Item |
JLY-Z50 |
|
Appearance |
Transparent withlight yellow liquid |
|
Solid Content (%) |
50±1（150℃，45min） |
|
Viscosity(mPa·S(25℃)) |
6000-8000 |
|
Lonicity |
Non-ionic |
|
Solvent |
Water or environmental hydrophilic solvent |
Character
1.High efficient performance offalse plastic, and obviously improving the high viscosity of coating under low shear
2.Goodcompatibility with various water based resin
3. Excellentfilm-forming,high gloss,better false plastic performance than cellulose and alkali swelling agent
4. Usually couldn’t be influenced by change of PH value
Storage
Suggesting sealed storage, temperature from 5℃to 35℃,can’t freeze Shelf life:12 months
Package
125Kg、50KG/Drum
JLY-ZM50 is as an non-ionic polyether type polyurethane thickener(HEUR) as rheological agent with medium shear viscosity. Widely used for coating and painting,ink,adhesive etc
JLY-T01 is as water based anion aliphatic polyurethane dispersion resin with good adhesion and tensile strength, applid in textile printing ink and surface coating, leather coating, waterproof coating etc
JLY-1740 as environmental waterborne(water-based) acrylic resin, which be useful for film gravure reverse printing ink, soluble in water, available for making of various gravure printing ink
JLY-1136 as solvent based polyurethane resin for lamination printing ink, available for the production of benzene-free and ketone-free gravure red ink
JLY-1599 is high performance aqueous polyurethane resin, which used for film gravure reverse printing ink, soluble in both water and alcohol, especially for the production of gravure printing pigment ink with good adhesion
JLY-L01 is as water-based anion aliphatic polyurethane dispersion emulsion, excellent physical and chemical properties, suitable for surface glossy varnish of wood, textile, plastics, leather etc
JLY-103 as a high-temperature boiling resistant polyurethane resin with excellent dispersion performance for carbon black, especially suitable for the production of high-speed film gravure reverse printing pigment and black ink
S-6961-1 is excellent Bonding Strength Polyurethane PU Resin for Printing ink.It's as one of forming-film polyurethane binder for production of gravure printing ink
IPv6 network supported
English
русский
español
português
العربية
日本語
한국의
Türkçe
ไทย
हिंदी
Indonesia 
